亚洲Aⅴ天堂Av在线观看,日本无遮挡吸乳视频,宝贝把腿张开我要添你下边L,国产精品人人妻人人爽久久

上海富晨化工有限公司

外涂層（TopCoating）工藝要點

用外涂層時，由于空氣的存在，會抑制樹脂的固化，導致表面會發粘或固化不完全
2021-03-15 14:01:56
用外涂層時，由于空氣的存在，會抑制樹脂的固化，導致表面會發粘或固化不完全，此時必須加入樹脂0.2-0.4%的石蠟，加入時最好先配制成10%的苯乙烯石蠟溶液。但含蠟樹脂只能用于表層，否則會降低層間的結合力。(Oxygen in the air will inhibit the complete cure of exposed resin layer. In order to reduce or eliminate this effect, 0.2-0.4% wax can be added to the resin used in the topcoat layer, the small amount of wax is incorporated readily into the system by preparing 10% wax-styrene. This waxed resin should only be used in topcoat, otherwise they will inhibit adhesion of laminate layer.)
選擇區號